Using your radio – Cobra Electronics FRS237 Manuel d'utilisation

Page 5

Advertising
background image

38 Privacy Codes

Customer

Assistance Warranty

Introduction

7

Nothing

comes close to a Cobr

a

Operation

Scr

olling Through

the Mode Function

By scr

olling through the Mode function, you will

be able to select or turn On preferred features of
your microTALK

®

radio. When scrolling through

the Mode function, your radio features will be
displayed in the same predetermined order:
Set Privacy Code
Set Channel Scan
Set Privacy Code Scan
Set Call Tones
Set “Roger Beep” On/Off

Channels

T

o Select a Channel:

1.

With the radio On, select any of the
14 channels by pressing the

Channel Up

or Channel Down button.

Both radios must be tuned to the
same channel to communicate.

CTCSS Privacy Codes

CTCSS (Continuous T

one Coded Squelch System)

is an advanced tone coding system allowing you
to select one of 38 privacy codes to reduce
interference from other users on the channel.

If you are using a privacy code, both
radios must be tuned to the same channel
and privacy code to communicate. Each
channel will remember the last privacy
code you selected.

T

urning On Your microTALK

®

Radio

T

o Turn On Your Radio:

1.

Press and hold the

Power button until you

hear a series of audible tones indicating
the radio is On.

Your microTALK

®

radio is now in

Standby Mode,

ready to receive transmissions. The radio is
always in

Standby Mode except when the T

alk

,

Call or Mode buttons ar

e pressed.

Batter

y Low

When batter

y power is low, the Battery Low icon

will blink. Your batteries should be replaced or
recharged, if using rechargeable batteries.

Auto Batter

y Save

Y

our microTALK

®

radio has a unique circuit

designed to extend battery life. If there are no
transmissions within ten (10) seconds, the radio
will automatically switch to

Batter

y Save Mode

and

Power Saver icon will flash in the display.

This will not affect the radio’s ability to receive
incoming transmissions.

Communicating with Another Person

T

o Talk To Another Person:

1. Pr

ess and hold the

T

alk

button.

2. With the microphone about five (5)

centimeters (2 inches) from your mouth,
speak in a normal voice.

3. Release the

T

alk

button when you ar

e

finished talking and listen for a response.

You cannot receive incoming calls while
pressing the

T

alk

button.

Both radios must be tuned to
the same channel to communicate.

6

English

Using Your Radio

Operation

Mode Button

On/Off Power

Battery Low

Battery Save Mode

Talk Button

Channel Button

Channel Number

5 cm (2 inches)
From Mouth

Advertising