Park brake and p (park) mechanism check, Wiper blade replacement, Park brake and p (park) – Cadillac 2011 Escalade Manuel d'utilisation

Page 434: Mechanism check -32, Wiper blade

Advertising
background image

Black plate (32,1)

Cadillac Escalade/Escalade ESV Owner Manual - 2011

10-32

Vehicle Care

Park Brake and P (Park)
Mechanism Check

{

WARNING

When you are doing this check,
the vehicle could begin to move.
You or others could be injured
and property could be damaged.
Make sure there is room in front
of the vehicle in case it begins to
roll. Be ready to apply the regular
brake at once should the vehicle
begin to move.

Park on a fairly steep hill, with the
vehicle facing downhill. Keeping
your foot on the regular brake, set
the parking brake.

.

To check the parking brake's
holding ability: With the engine
running and the transmission in
N (Neutral), slowly remove foot
pressure from the regular brake
pedal. Do this until the vehicle is
held by the parking brake only.

.

To check the P (Park)
mechanism's holding ability:
With the engine running, shift
to P (Park). Then release the
parking brake followed by the
regular brake.

Contact your dealer if service is
required.

Wiper Blade Replacement

Windshield wiper blades should
be inspected for wear or cracking.
See Scheduled Maintenance on
page 11‑2
.

Replacement blades come in
different types and are removed in
different ways.

Front Wiper Blade
Replacement

1. Pull the windshield wiper arm

connector away from the
windshield.

2. Squeeze the grooved areas on

each side of the blade, and turn
the blade assembly away from
the arm connector.

Advertising