Starting and operating, New vehicle break-in, Starting and operating -30 – Cadillac 2011 Escalade Manuel d'utilisation

Page 350: New vehicle break-in -30

Advertising
background image

Black plate (30,1)

Cadillac Escalade/Escalade ESV Owner Manual - 2011

9-30

Driving and Operating

Automatic Level Control

The automatic level control rear
suspension comes as a part of
the Road Sensing Suspension.
See Road Sensing Suspension
on page 9‑50
.

This type of level control is fully
automatic and will provide a
better leveled riding position as
well as better handling under a
variety of passenger and loading
conditions. An air compressor
connected to the rear shocks
will raise or lower the rear of
the vehicle to maintain proper
vehicle height. The system
is activated when the ignition
key is turned to RUN and will

automatically adjust vehicle
height thereafter. The system
may exhaust (lower vehicle
height) for up to 10 minutes
after the ignition key has been
turned to LOCK. You may hear
the air compressor operating
when the height is being
adjusted.

If a weight-distributing hitch is
being used, it is recommended
to allow the shocks to inflate,
thereby leveling the vehicle
prior to adjusting the height.
See “Weight distributing Hitches
and Weight Carrying Hitches”
under Towing Equipment on
page 9‑78

.

Starting and
Operating

New Vehicle Break-In

Notice: The vehicle does not
need an elaborate break-in. But it
will perform better in the long run
if you follow these guidelines:

.

Keep the vehicle speed at
88 km/h (55 mph) or less for
the first 805 km (500 miles).

.

Do not drive at any one
constant speed, fast or
slow, for the first 805 km
(500 miles). Do not make
full-throttle starts. Avoid
downshifting to brake or
slow the vehicle.

Advertising