Voltmeter gage, Brake system warning light, Voltmeter gage -32 brake system warning light -32 – Buick 2005 Rainier Manuel d'utilisation

Page 152

Advertising
background image

Voltmeter Gage

When your engine is not
running, but the ignition is
in RUN, this gage
shows your battery’s state
of charge in DC volts.

When the engine is running, the gage shows the
condition of the charging system. Readings between the
low and high warning zones indicate the normal
operating range.

Readings in the low warning zone may occur when a
large number of electrical accessories are operating in
the vehicle and the engine is left idling for an
extended period. This condition is normal since the
charging system is not able to provide full power
at engine idle. As engine speeds are increased, this
condition should correct itself as higher engine speeds
allow the charging system to create maximum power.

You can only drive for a short time with the reading in
either warning zone. If you must drive, turn off all
unnecessary accessories.

Readings in either warning zone indicate a possible
problem in the electrical system. Have the vehicle
serviced as soon as possible.

Brake System Warning Light

When the ignition is on, the brake system warning light
will come on when you set your parking brake. The
light will stay on if your parking brake doesn’t release
fully. If it stays on after your parking brake is fully
released, it means you have a brake problem. A chime
may also sound when the light comes on.

Your vehicle’s hydraulic brake system is divided into
two parts. If one part isn’t working, the other part can still
work and stop you. For good braking, though, you
need both parts working well.

If the warning light comes on, there could be a brake
problem. Have your brake system inspected right away.

3-32

Advertising