Manual rearview mirror with onstar, Compass, and temperature display -37, Compass, and temperature display – Buick 2005 Rainier Manuel d'utilisation

Page 105: Mirror operation, Temperature and compass display o, Compass calibration

Advertising
background image

Manual Rearview Mirror with
OnStar

®

, Compass, and

Temperature Display

The vehicle may have a manual rearview mirror with
OnStar

®

and an eight-point compass and temperature

display located in the upper right.

Control buttons for the OnStar

®

system are at the

bottom of the mirror. See your GM dealer for more
information about the OnStar

®

system. Also, see

OnStar

®

System on page 2-40 for more information

about the services OnStar

®

provides.

When cleaning the mirror, use a paper towel or similar
material dampened with glass cleaner. Do not spray
glass cleaner directly on the mirror as that may cause
the liquid cleaner to enter the mirror housing.

Mirror Operation

While sitting in a comfortable position, adjust the
rearview mirror so you can see clearly behind your
vehicle. Grip it in the center and move it up or down and
side to side. The day/night control, located at the
bottom of the mirror, adjusts the mirror to reduce
headlamp glare from behind during evening or dark
conditions. Push the control for daytime use; pull it for
night use.

Temperature and Compass Display

O

(On/Off): Press this button to turn the compass and

temperature display on or off. The compass display, can
show a maximum of two characters. For example, NE is
displayed for north-east.

When the ignition and the compass/temperature
feature are on, character boxes will appear for about
two seconds. After two seconds, the mirror will display
the direction the vehicle is facing and the outside
temperature.

To set the temperature in Fahrenheit or Celsius, do the
following:

1. Press and hold the on/off button until either a

flashing F or C appears.

2. Press the button again to change the display to the

desired unit of measurement. After about four
seconds of inactivity, the new unit will be locked in
and the compass/temperature display will return.

Compass Calibration

When on, the compass automatically calibrates as the
vehicle is driven. If, after two seconds, the display does
not show a compass direction, N for North, for example,
there may be a strong magnetic field interfering with the
compass. Such interference may be caused by a
magnetic antenna mount, magnetic note pad holder, or a
similar magnetic item. If the letter C should ever appear in
the compass window, the compass may need calibration.

2-37

Advertising