Crosley W10096992A - Manuel (Page 6)

6
SENSOR DRY/AUTO DRY – Senses moisture in the load or air temperature and shuts off when the load reaches the selected dryness
level. Choose ENERGY PREFERRED cycle for optimal energy savings.
Not all cycles and settings are available on all models. Settings and options shown in
bold are default settings for that cycle.
Items to dry: Temperature: Available
Options:
Cycle Details:
Wrinkle Prevent
End of Cycle Signal
CYCLE GUIDE — SENSOR DRY/AUTO DRY CYCLES
CYCLE GUIDE — TIMED DRY CYCLES
Items to dry: Temperature: Cycle: Available
Options:
Cycle Details:
TIMED DRY – Will run the dryer for the specified time on the control.
Not all cycles and settings are available on all models.
Large or heavy items
such as thick towels or
robes
Small loads,
lightweight items
Heavy Dry
Timed Dry Low
End of Cycle Signal
End of Cycle Signal
Choose high to dry large or heavy loads.
Dries items to a damp level or for items
that do not require an entire drying
cycle.
NOTE: If loads do not seem as dry as you would like, select Heavy Dry or Very Dry/More Dry next time you dry a similar load. If loads
seem drier than you like, select Less Dry next time you dry a similar load.
Casual, shirts, pants,
lightweight items,
synthetics, delicates,
athletic wear
High
Wrinkle Prevent
End of Cycle Signal
Setting the Drying Temperature
If your dryer has multiple heat settings:
A High temperature setting may be used for drying
heavyweight items such as towels and work clothes.
A Low to Medium temperature setting may be used for
drying medium-weight items such as sheets, blouses,
dresses, underwear, permanent press fabrics, and
some knits.
Use the Air Dry/No Heat setting for foam, rubber, plastic,
or heat-sensitive fabrics.
Line-dry bonded or laminated fabrics.
NOTE: If you have questions about drying temperatures for
various loads, refer to the care label directions.
Jeans, heavy work
clothes, towels
Heavy Dry
Very or More Dry
Energy Preferred
Less Dry
Heavy Dry
Very or More Dry
Energy Preferred
Less Dry
Heavy Dry
Very or More Dry
Energy Preferred
Less Dry
Wrinkle Prevent
End of Cycle Signal
Automatic cycles give the best drying
in the shortest time. Drying time varies
based on fabric type, load size, and
dryness setting.
Select a drying temperature based on
the fabrics in your load. If you are unsure
of the temperature to select for a load,
select the lower setting rather than the
higher setting.
Dryness Level:
High
Medium or Low
Low
Work clothes, medium
weight fabrics, sheets
Rubber, plastic,
heat-sensitive fabrics
Air Dry/
No Heat
Air Only/No Heat End of Cycle Signal No-heat drying.
Heavy or bulky items Timed Dry
High Heat
High End of Cycle Signal Completes drying if items are still damp.