Panasonic Removable Face High-Power /Receiver DPX30EUC - Manuel (Page 24)

Installation Guide
continued
Caution:
1. Before removing the removable face plate, make sure the power is off.
2. This removable face plate is not water-proof. Do not expose it to water or excessive moisture.
3. Do not remove the removable face plate, while driving your car.
4. Do not place the removable face plate on the dashboard or nearby areas where the temperature
rises to high levels.
5. Do not touch the contacts on the removable face plate or on the main unit, since this may result in
poor electrical contacts.
6. If dirt or other foreign substances get on the contacts, wipe them with a clean, dry cloth.
Caution:
• To prevent damage to the unit, be sure to follow the connection diagram below.
• Remove the covering of the leads about 5 mm long from their end before connecting.
• Do not insert the power connector into the unit until the wiring is completed.
• Be sure to insulate any exposed wires from a possible short-circuit from the car chassis. Bundle all
cables and keep cable terminals free from touching any metal parts.
BATTERY LEAD
(Connect to car battery)
POWER
(+12V DC, negative
ground only)
GROUND
(Connect to a clean, bare
metallic part of your vehicle.)
MOTOR ANTENNA
RELAY CONTROL
(Moves antenna up and
down)
(FRONT) (FRONT) (REAR) (REAR)
24
CQ-DPX50/DPX30EUC