Initial time setting, Resetting the time, Selecting the clock display – Panasonic Removable Face High-Power /Receiver DPX30EUC Manuel d'utilisation
Page 14: Clock basics, H d u
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
Clock Basics
(The clock system is 12-hours.)
H d u
/3nn
fL'Up"
Initial Time Setting
® Press DISP. “AdJ” is displayed.
® Press and hold DISP again for more than
2 seconds, “12" blinks indicating the time
setting mode is activated.
©To set hours, press “vTUNE” or “TUNE
a
" .
® Press DISP again for minute setting.
© To set minutes, press “vTUNE" or “TUNE
a
” .
Hold or “V” to change numbers rapidly.
©When you have set the time, press DISP.
Resetting the Time
When you want to reset the time, press DISP for more than 2
seconds to activate the time setting mode. Then, repeat step (D to ©
above.
Selecting the Clock Display
Press DISP for clock display.
Press DISP once again, the current audio display mode resumes.
When power is turned off while the time is displayed, the clock mode]
remains on. When the PWR is pressed again, the system is completely.
Note; Before you leave your car that has no ACC, be sure to switch]
power off.
CQ-DPX50/DPX30EUC