Using the rubber cushion (optional), Plug the power connector, To remove the unit – Panasonic Removable Face High-Power /Receiver DPX30EUC Manuel d'utilisation
Page 22: Installation guide
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
Installation Guide
continued
■ Using the Rubber Cushion (Optional)
(If there is an existing Rear Support Bracket on the Fire Wall of Car.)
Cover Mounting Bolt d) on the rear of the unit with Rubber Cushion (Optional), and mount it into existing
Rear Support Bracket.
Rear Support Bracket
(existing on the car)
3. Plug the Power Connector
\ Rubber Cushion (Optional)
D Mounting Bolt
Ф Mounting Collar
4. After installation reconnect the negative (-) battery terminal.
To Remove the trim plate (for Japanese Cars)
You may not be able to install this unit in some makes of Japanese cars. In
such a case, consult your dealer or professional.
To mount this unit on a Japanese car, first cut the 9 slit in back of the trim
plate with side-cut pliers, remove the trim plate, then mount this unit.
To Remove the Unit
a) Remove the removable face plate. (See page 23.)
b) Pull out the unit while pushing the lock lever using Dismounting Plate ®
c) Remove the unit pulling with both hands.
Note: Do not lose the Dismounting
Plate. It will be needed to remove
the unit from the car’s dashboard.
22
CQ-DPX50/DPX30EUC