Sony DVP-S7700 - Manuel (Page 37)

Settings for Sound (INITIAL
SETUP 2)
Select "IIH3J2 " after pressing SET UP.
"INITIAL SETUP2" allows you to set the sound
according to the playback conditions.
Default settings are underlined.
I N I T I A L S E T U P 2
T R A C K S E L E C T I O h l : O F F
0000 - m QUIT sa
■TRACK SELECTION
Gives the sound track which contains the highest number of
the channels priority when you play a DVD on which
multiple audio formats are recorded. If multiple audio
channels are recorded in PCM, DTS or Dolby Digital (AC-3)
format, the higher-numbered channel audio recorded in DTS
or Dolby Digital (AC-3) format is played.
• OFF: No priority given.
• AUTO: Priority given.
Notes
• When you set this item to "AUTO", the language may
change depending on the "AUDIO" settings in
"LANGUAGE SETUP."
The "TRACK SELECTION" setting has higher priority than
that of "AUDIO" settings in "LANGUAGE SETUP" (page
35).
• If you set "DTS" in "INITIAL SETUP 3" to "OFF", the DTS
sound track is not played even if you set this item to
"AUTO" and the highest-numbered channel audio is
recorded in DTS format.
• If the number of the highest channels of the DTS sound
tracks is the same as the one of the Dolby Digital (AC-3)
sound tracks, the player selects DTS and Dolby Digital (AC-
3) sound tracks, in this order. Flowever, if the highest
charmel number is 2, the player selects PCM, Dolby Digital
(AC-3), and DTS sound tracks, in this order.
• Depending on the DVD, the audio with priority may be
predetermined. In this case, you cannot give priority to the
DTS or Dolby Digital (AC-3) format by selecting "AUTO."
■SURROUND
Switches the mixing down methods when you play a DVD on
which the sound in Dolby Digital (AC-3) format is recorded.
• ON: when the player is connected to an audio component
that conforms to Dolby surround, Dolby Pro Logic
surround, etc.
• OFF : when the player is connected to a normal audio
component.
■AUDIO DRC (Dynamic Range Control)
Makes the sound clear with the volume turned down at night,
etc. when you play a DVD. This affects the output from the
LINE OUT (AUDIO 1,2) connectors when you play the Dolby
Digital (AC-3) sound tracks.
• OFF: Normally select this position.
• ON: makes the sound clear even if you fumed the volume
down.
Note
When you play DVDs without the AUDIO DRC function,
there may be no effect on the sound.
■AUDIO ATT (attenuation)
Selects the setting of the output from the LINE OUT (AUDIO
1,2) connectors according to audio equipment to be
connected.
• OFF: turns off the audio attenuation.
• ON: reduces the audio output level so that no sound
distortion occurs.
Note
The setting does not affect the output from the DIGITAL OUT
connectors.
■AUDIO FILTER
Selects the type of digital filter to reduce the noise higher
frequency than 22.05kHz (fs 44.1kHz), 24kHz (fs 48kHz) or
48kHz (fs 96kHz).
• SFLARP: makes the sound clear and provides smooth sound
reproduction. Normally set this position.
• SLOW: makes the sound warm and deep.
Note
Depending on the disc, there may be no effect on the sound.
37 us