To cancel the combine function, To cancel the move function, Moving recorded tracks (move function) – Sony MDS-JA30ES Manuel d'utilisation

Page 33: Example; moving track c to track position 2, Labeling recordings (title function), Continued), Editing recorded mds

Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".

Advertising
background image

Editing Recorded MDs

5

Turn AMS to select the second track of the two to
be combined and press YES or AMS.

“Complete!!" appears for a few seconds and the
total number of tracks in the music calendar
decreases by one.
If both of the combined tracks have track titles, the
title of the second track is erased.

To cancel the Combine Function

Press EDIT/NO or ■.

'Q" You can undo the Combine Function

Dix'ide the tracks again (see "Dividing Recorded

Tracks" on page 31), then repeat the combine function
with the correct tracks if necessary.

Note

If "Impossible" appears in the display, the tracks cannot be

combined. This sometimes happens when you've edited the

same track many times, and is due to a technical limitation
of the MD system, not a mechanical error.

3

Press AMS.

4

Turn AMS to select the track to be mov'ed and

press AMS.

5

Turn AMS until the new track position appears.

Track number

New track

to be moved

position

6

Press YES or AMS.
"Complete!!" appears for a few seconds and the
moved track begins playing back if the deck is in
playback mode.

To cancel the Move Function

Press EDIT/NO or ■.

Moving Recorded Tracks
(Move Function)

Else the Move Function to change the order of any
track. After you move a track, the track numbers
between the new and old track positions are
automatically renumbered.

Example; Moving track C to track position 2

Track

nunrber

Moving

o

1

2

3

4

A

B

c

D

n Track C moves to

1

2

^

track position 2

3 4

A

C

B

D

EDIT/NO YES

1

While the deck is stopped, playing, or pausing,
press EDIT/NO.

2

Turn AMS until "Move ?" appears in the dispi ay.

Labeling Recordings
(Title Function)

You can create titles for your recorded MDs and tracks.
Titles — which may consist of uppercase and
lowercase letters, numbers and symbols for a
maximum of about 1,700 characters per disc — appear
in the display during MD operation. You can label a
track or an MD by using the controls on the deck or on
the remote.

EDIT/NO

YES

DISPLAY/CHAR

IKW AMS >011

Use the following procedure to label a track or an MD.

You can label a track while it is playing, pausing or
recording. If the track is playing or recording, be
sure to finish labeling before the track ends. If the
track ends before you've completed the labeling

procedure, the characters already entered are not
recorded and the track will remain unlabeled.

1

Press EDIT/NO.

2

Turn AMS until "Name ?" appears in the display

and press AMS.

(Continued)

33'

Advertising