Playing back with different tones (digital filte^), Note, You can select the filter using the remote – Sony MDS-JA30ES Manuel d'utilisation
Page 27: What is a v.c. (variable coefficient) filter, Notes, Fading in and out (fader), Fade-in playback, Standard, Plane, Playing mds
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
Playing MDs
Playing Back With Different
Tones (Digital Filte^)
This deck is equipped with the V.C. (Variable
Coefficient) filters to allow you adjust the tone to
match your audio system, listening environment, and
the source being played back.
Note
The digital filters are effective only on the analog signals
output from the LINE(ANALOG) OUT connectors and the
PHONES connector.
FILTER
□
CvID
5E2.
©
(ij dj
1 0 O
o o
i 1
s o © ©
J
1
Press FILTER.
The currently selected filter appears in the display.
2
Press FILTER repeatedly to select the filter that
you want.
Each press of the button changes the filter as
follows:
[!
DF:Standard —»DF:Spline* —► DF:Analog —► DF:Plane
* European model only
You can select the filter using the remote
.Press FILTER repeatedly until the filter that you want
appears in the display.
What is a V.C. (Variable Coefficient) filter?
A variable coefficient filter changes the sound
characteristics of a signal by applying specific frequency
cut-off conditions. Such filters are provided on digital
devices such as CD players and MD decks to remove
aliasing noise. Your deck comes with four or three types
of digital filters. A brief description is given below of the
sound characteristics of each filter.
Notes
• A momentary sound dropout occurs when the filter
setting is changed during playback or recording.
• The change in sound characteristics caused by digital
filters occur mainly in the inaudible range, not the audible
range as in the case of an amplifier.
Fading In and Out (Fader) ||
You can gradually increase the playback level of the
signal output from the L1NE(ANALOG ) IN/OUT
connectors and the PHONES connector at the
beginning of a playback (fade in) or gradually decrease
the playback level at the end of a playback (fade out).
This function is convenient when, for example, you
want to start or end playback in the middle of the
track.
©
c5-c5
©'©-©-©•©
■® @ @ @ ©
qdocd
'
c
S'S
c5 Q
□ QD [El
CX]
CD
c5
Q
Q
qd
'®'® cii> rnl
-FADE
Fade-in playback
During playback pause, press FADE at the position
where you want fade-in playback to start.
"FADE IN" flashes in the display and the deck
performs fade-in playback until the counter reaches to
"0.0s."
Standard
This filter produces an expansive sound of wide range.
Spline (European model only)
This filter produces a sound that is clearly positioned
and smooth.
Plane
This filter produces a fresh and powerful sound.
Analog
This filter produces a resonant and mellow sound.
27
'