Playing back tracks just recorded, Recording over existing tracks, While "tr" flashes in the display – Sony MDS-JA30ES Manuel d'utilisation
Page 12: Q' to record from the middle of the track, Note, Recording on mds
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
Recording on MDs
Playing back tracks just recorded
Do this procedure to immediately pla\- back tracks that
have just been recorded.
Press ► immediately after stopping recording.
Playback starts from the first track of the material just
recorded.
To play from the first track of the MD after
recording
1
Press ■ again after stopping recording.
2
Press ►.
Playback starts from the first track of the MD.
Recording Over Existing Tracks
Follow the procedure below to record over existing
nraterial just as you would on an analog cassette tape.
KM AMS t>Oll
_J
Cl'
« j]) Ji i
nifrmn
1
Do Steps 1 to 4 in "Recording on an MD" on page
8
.
2
Turn AMS (or press or ►►!) until the
number of the track to be recorded over appears.
3
To record from the start of the track, continue
from Step 5 in "Recording on an MD" on page 9.
While "TR" flashes in the display
The deck is recording over an existing track, and stops
flashing when it reaches the end of the recorded
portion.
'Q'
To record from the middle of the track
1
After Step 2 above, press ► to start playback.
2
Press II where you want to start recording.
3
Continue from Step 5 in "Recording on an MD" on
page 9.
Note
You cannot record from the middle of an existing track when
the "PROGRAM" or "SHUFFLE" is on.
12
'