Compur Statox 501 IR Manuel d'utilisation

Page 10

Advertising
background image


9.

Caratéristiques techniques

9. Technical

Data

• Nom du produit Transmetteur Statox 501 IR • Product name Statox 501 IR Transmitter

• Type

5370

063

• Fabricant

COMPUR Monitors, Munich

• Echelle de mesure

0 - 100% UEG

• Principe de mesure

NDIR à 2 voies

• Limite de détection

3% LIE Méthane

• Affichage

LED, trois digites

• Temps de réponse CH

4

t

50

< 10s, t

90

< 25s

• Précision (pleine échelle) < ± 2% LIE

• Temps de chauffe

20 s

• Spécifications atteintes après 30 min

• Température d’utilisation -20°C à +44°C

• Température de stockage -20°C à +60°C

• Humidité

0 - 99% HR.

• Pression

800 - 1100 hPa,

Déviation < ± 0,1% / hPa

• Explosionsschutz

EEx de IIC T5

• Class instrument

II 2 G

• Certification BVS 04 ATEX E 006 X

• Tension

24VDC (18-29VDC)

• Puissance

1 Watt

• Courant max. 80 mA à 24 V

• Sorties

4-20 mA,Rmax 220 Ohm

• Demande de service LED jaune clignote,
Sortie 2 ou 4mA

• Erreu du système LED jaune allumée,
Sortie 2 ou 4mA,
erreur fatale 0 mA

• Protection EN 60529 IP 67

• Dimensions (LxlxP)

150x120x120mm

• Instruction d’installation Capteur vers le bas et
position droite à ± 90°

• Poids

3,1 kg

• Matériaux

PA et acier 1.4305

• EMV

EN 50270

• Performance approuvée EN 61779-1 et -4







• Type

5370 063

• Manufacturer COMPUR Monitors, Munich

• Measuring Range 0 - 100% LEL

• Measuring principle 2-channel NDIR

• Detectable limit 3% LEL Methane

• Display

LED, three digit

• Response time, i.e. CH

4

t

50

< 10s, t

90

< 25s

• Accuracy (full scale) < ± 2% LEL at RT

• Warm up time 20 s

• Specifications reached after 30 min

• Temperature -20°C to +44°C (-4 to +112°F)

• Storage Temperature -20°C to +60°C (-4 to +140°F)

• Humidity 0 - 99% r.F.

• Pressure range 800 - 1100 hPa,
Deviation < ± 0,1% / hPa

• Approval EEx de IIC T5

• Instrument class II 2 G

• Certificate BVS 04 ATEX E 006 X

• Voltage 24VDC (18-29VDC)

• Power 1 Watt

• Current max. 80 mA at 24 V

• Output 4-20 mA, max. load 220 Ohm

• Service request yellow LED flashing,
output 2 or 4mA

• System failure yellow LED on,
output 2 or 4mA,
fatal error 0 mA

• Protection class EN 60529 IP 67

• Dimensions (HxWxD) ca. 150x120x120mm
(5,9x4,7x4,7in)

• Installation instructions upright position ± 90° ,
sensor downwards

• Weight

ca. 3,1 kg (6,8 pound)

• Material

PA and Steel 1.4305

• EMV

according to EN 50270

• Performance approval EN 61779-1 and -4


Les caractéristiques techniques de ce produit peuvent faire l’objet de
modifications sans préavis. Compur Monitors n’a pas de contrôle sur
l’utilisation de ses produits. Pour cette raison, il est de la responsabilité
de l’utilisateur de se renseigner sur nos produits afin de déterminer s’ils
sont adaptés à l’utilisation, à l’application et aux conditions envisagés.
Toutes les informations fournies ne font pas l’objet d’une garantie.
Compur Monitors se dégage de toute responsabilité pour toute utilisation
non conforme ou incorrecte, négligence, ou autre de ses produits et de
ses informations. Tout élément ou recommandation non contenus dans
ce document ne sont pas autorisés et ne peuvent en aucun cas
impliquer la responsabilité de Compur Monitors. Aucun élément décrit
dans ce manuel ne peut être assimilé à une recommandation
d’utilisation de produits qui sont sous la protection d’un brevet. Les
appareils sont fabriqués par Compur Monitors GmbH & Co. KG, Munich.
Les conditions générales de vente et de service de Compur Monitors
GmbH & Co. KG sont applicables.

Specifications are subject to change without notice, and are provided only for
comparison of products. The conditions, under which our products are used,
are beyond our control. Therefore, the user must fully test our products and/or
information to determine suitability for any intended use, application, condition
or situation. All information is given without warranty or guarantee. Compur
Monitors disclaims any liability, negligence or otherwise, incurred in
connection with the use of the products and information. Any statement or
recommendation not contained herein is unauthorized and shall not bind
Compur Monitors. Nothing herein shall be construed as a recommendation to
use any product in conflict with patents covering any material or device or its
use. No licence is implied or in fact granted under the claims of any patent.
Instruments are manufactured by Compur Monitors GmbH & Co. KG, Munich.
The General Conditions of Supply and Service of Compur Monitors GmbH &
Co. KG are applicable.

Advertising