4valve adjustment, Hotplate, Reassemble – La Cornue CornuFé 44 Conversion to Propane Gas Manuel d'utilisation

Page 4

Advertising
background image

SERVICING - WARNING

Disconnect from electricity and gas before servicing. Check appliance is safe when you have

finished.

4

Valve adjustment

Pull off all the control knobs.
Open both oven doors and remove the fixing screws
underneath the control panel.
Remove the 3 fixing screws at the top of the control
panel.
Pull the control panel forward. Taking care not to
damage it, by protecting it with cloth for example, rest it
on the open oven doors.

To convert the control valves

Unscrew the control valve bypass screw.

Using a pair of long nose pliers carefully remove the
bypass screw.

Install the correct replacement screw. See table for
correct size. Tighten the screw down.

Valve Bypass screws

Natural Gas

Propane Gas

Hotplate

Bypass

Bypass

Center burner

82

49

Large Burners

70

38

Right front burner

53

31

Save the bypass screws removed from the appliance for
possible future re-conversion to Natural gas.

Reassemble

Replace the control panel and secure with fixing screws.

If you have lifted the maintop, carefully lower it onto
the range. The burners are protected against the burner
flames going out by Flame safety devices (FSD’s).
Take care when lowering the maintop to locate the FSD
sensor probes (arrowed below) in their holes in the cook
top and the burner bases.

Advertising