La Cornue CornuFé 44 Conversion to Propane Gas - Manuel (Page 3)

3
SERVICING - WARNING
Disconnect from electricity and gas before servicing. Check appliance is safe when you have finished.
Regulations
Installation of this range must conform with local codes,
or in the absence of local codes, with the National Fuel
Gas Code, ANSI Z223.1/NFPA.54, latest edition.
In Canada, installation must conform with the current
Natural Gas Installation Code, CAN/CGA-B149.1 or the
current Propane Installation Code, CAN/CGA-B149.2, and
with local codes where applicable.
This range has been design-certified by CSA
International according to ANSI Z21.1, latest edition and
CAN/CGA-22.2 latest edition.
Read the instructions before installing or using this
appliance. This range becomes hot in use, the maintop
burners produce exhaust gases. Take safety precautions
- see the safety warnings in the User Guide, which should
be read together with this installation guide.
The range must be electrically grounded in accordance
with local codes or, in the absence of local codes, in
accordance with the National Electrical Code (ANSI/
NFPA 70, latest edition). In Canada, electrical grounding
must be in accordance with the current CSA C22.1
Canadian Electrical Code Part 1 and/or local codes.
Important
• Observe all governing codes and ordinances.
• The range must be properly grounded.
• Save these instructions for the local electrical
inspector’s use.
When servicing or replacing gas carrying components
disconnect from gas before commencing operation
and check appliance is gas sound after completion.
When checking for gas leaks use a liquid leak detector
at all joints and connections to check for leaks in the
system. Use a product specifically manufactured for
leak detection. Leak testing of the appliance shall
be conducted in accordance to the manufacturer’s
instructions.
For Your Safety
Do not store or use combustible materials, gasoline or
other flammable vapors and liquids in the vicinity of this
or any other appliance.
If you smell gas
• Open windows.
• Don’t touch electrical switches.
• Extinguish any open flame.
• Immediately call your gas supplier
Conversion to Propane
This appliance is supplied set for Natural gas. A
conversion kit for Propane gas is supplied with the
range.
If the appliance is to be converted this must be done
before installation. The conversion must be performed
by a qualified LP gas installer. After conversion the
installation must comply with the relevant regulations
and also the local electricity supply company
requirements. Read the instructions before converting
this appliance.
Failure to convert the appliance correctly could
invalidate any warranty or liability claims and lead to
prosecution.
This instruction must be used in conjunction with
the rest of the appliance instruction, in particular for
information on Standards, range positioning, connection
hose suitability etc.
When servicing or replacing gas-carrying components
disconnect from gas before commencing operation and
check appliance is gas sound after completion.
Do not use re-conditioned or unauthorized gas controls.
Orifices
Burner head
Brass venturi
Burner base
Burner ring
Remove burner heads. Undo the large brass nuts and
remove the brass venturis and rings.
Either:
Use a long socket wrench to access and remove the
old orifices.
Or:
Lift up the front of the maintop and prop it up at the
front. Remove the old orifices.
Save the orifices removed from the appliance for future
use. Install new orifices.
Natural Gas Propane Gas
Center burner 205 118
Large Burners 150 99
Right front burner 112 68
Replace the rings on the burners. Screw in the hexagon
headed venturi to make fitting the burners easier. Do not
tighten yet.
When all the burner bases and venturis have been fitted
tighten the venturi nuts.