Operation – Summit CL15WC Manuel d'utilisation

Page 9

Advertising
background image

Operation

For Model CL24WC2:

Control elements

1) “

” button

To turn this unit ON and OFF, press and
hold this button for approximately 3
seconds.

2) “

” button

Energy conservation button: Pressing this
button for 3 seconds will turn the energy
conservation mode either ON or OFF. In
this mode, the LED light and display will
be turned off; the °F/°C light will be on.

3) “

” button (left)

Pressing this button will increase (warm)
the temperature of the upper chamber in
steps of 1

°F (or 1°C).

4) “

” button (left)

Pressing this button will lower (cool) the
temperature of the upper chamber in steps
of 1

°F (or 1°C).

5) LED display

Displays temperature for the upper zone.

6) “

“ indicator light

Indicates that compressor is operating.

7) “°C/°F ” indicator light

Will change as the “°C/°F ” button is
pressed.

8) LED display

Displays temperature for the lower zone.

9) “

” button (right)

Pressing this button will increase (warm) the
temperature of the lower chamber in steps of
1

°F (or 1°C).

10) “

” button (right)

Pressing this button will lower (cool) the
temperature of the lower chamber in steps of
1

°F (or 1°C).

11) “°C/°F ” button

Pressing this button switches the indicator
light between °C and °F.

12)

button

Turns the interior light ON or OFF. (If you
use this button, the light is no longer con-
trolled by the reed switch, and remains ON.)

Setting the temperature

 When you press the

or

button, the

system will enter the set-up mode in the
upper or lower compartment automatically.
The LED will flash and display the setting
temperature.

 When you press the button once, the

temperature will increase or decrease by
1

°F (or 1°C). If you try to go beyond the

minimum/maximum value that can be
established, the display will jump to the
lowest/highest adjustable temperature value
automatically. If a button is not pressed for 5
seconds, the LED will stop flashing and the
setting mode will be exited.

 Temperature range for upper and lower

compartments: The temperature setting can
be adjusted from 39°F to 64°F

(or 4°C to

18°C).

8

Advertising
Ce manuel est liée aux produits suivants: