Operation, Operating conditions, Control elements – Summit CL15WC Manuel d'utilisation

Page 8: Setting the temperature

Advertising
background image

Operation

Operating conditions

Proper operation of the appliance is
guaranteed only if the following conditions are
met:
 The temperature in the room where the

appliance is located conforms to the
climate class stated on the appliance’s
rating label.

Maximum ambient relative humidity:
RH75%.

The appliance must be placed at a
sufficient distance from heat sources ( e.g.,
ovens, central heating, direct sunlight,
etc.).

The appliance must be located in such a
place that it is protected against the effects
of weather.

 Regular maintenance is performed

according to the instructions in this user’s
manual.

The ventilation openings on the appliance
must not be covered.

Correct installation ( e.g. leveling, the
capacity of the system corresponds to
the specifications on the rating label of
the appliance).

For Models CLFD24WC, CL241BV and
CL15WC:

Control elements

1) “

” button

To turn the unit ON and OFF, press and
hold this button for approximately 3 seconds.

2) “

” button

Energy conservation button: Pressing this
button for 3 seconds will turn the energy



conservation mode ON or OFF. In this
mode, the LED light and display will turn
off, and the

°C/°F light will be on.

3)

indicator light

Shows that the compressor is in operation.

4)

°C/°F”

indicator light

The temperature scale is changed by
pressing the “

°C/°F”

button.

5)

button

Used to increase (warm) the temperature
in steps of 1

°F (or 1°C).

6)

” button

Used to decrease (cool) the temperature in
steps of 1

°F (or 1°C).

7) “°C/°F”

button

Press this button to switch the indicator
light between

°C/°F.

8)

button

Turns the interior light ON and OFF. (If you
use this button, the light is no longer con-
trolled by the reed switch, and remains
ON.)

9)

LED display

Shows the temperature of the internal
cabinet.

Setting the temperature

 Insert the power plug into a properly

grounded power socket.

 Use the

/

buttons to set the desired

temperature of the appliance. Each time

the

/

buttons are pressed, the

temperature will increase / decrease by
1

°F (or 1°C).

 You can set the temperature in the range

of 39°F to 64°F (or 4°C to 18°C) .

7

Advertising
Ce manuel est liée aux produits suivants: