Breville BTM800XL - Manuel (Page 7)

12 13
PREPARING THE TEA MAKER
FOR USE
In order to remove any dust or protective
residues from the manufacturing process, it
is recommended to run a boiling cycle then
discard the water.
Remove and safely discard any packing 1.
material, promotional labels and tape
from the Tea Maker.
Remove the Jug Lid then remove the 2.
Tea Basket from the magnetic post
within the Glass Jug. Wash the Jug
Lid, Tea Basket, Basket Lid and Tea
Scoop in warm soapy water with a soft
sponge, rinse and dry thoroughly.
NEVER IMMERSE THE BASE
OF THE GLASS JUG, THE
POWER BASE, POWER CORD
OR POWER PLUG IN WATER OR
ALLOW MOISTURE TO COME IN
CONTACT WITH THESE PARTS.
Place the Power Base on a fl at, dry 3.
surface.
Without the Tea Basket in place, fi ll the 4.
Glass Jug to the water maximum mark
(1500mL WATER MAX) and place on
the Power Base. Securely fi t the Jug Lid
onto the Glass Jug.
NEVER FILL THE GLASS JUG
WITH CHILLED WATER. ALLOW
THE TEA MAKER TO COOL
BEFORE REFILLING.
Press the HOT WATER|Cancel button 8.
to start the cycle. The button surround
will illuminate and the LCD screen will
display 'ON' and the real-time heating
progress in increments of 5°F.
Once the water reaches 212°F, the 9.
tea alert will sound three times and
the HOT WATER|Cancel button
surround will cease to illuminate.
Discard the water. The Tea Maker is 10.
now ready to use.
TIPS FOR OPTIMAL TEA BREWING
Water quality affects taste. For best •
results, use fi ltered water.
Finer tea particles and leaves will infuse •
more quickly than whole leaves. As a
result, fi ner tea particles often release
too much tannin too quickly, creating a
harsher taste. Adjust the brewing time
until desired strength is achieved.
Using the tea scoop provided, spoon •
roughly one scoop of tea per cup / 8oz
of water.
BEFORE FIRST USE BEFORE FIRST USE
FILLING PAST THE 'MAX' LINE
MAY RESULT IN SERIOUS BURNS
OR INJURIES AS A RESULT OF
OVERFLOWING HOT OR BOILING
WATER. FILLING BELOW THE
'MIN' LINE WILL RESULT IN
THE TEA MAKER SWITCHING
OFF BEFORE THE WATER HAS
BOILED OR REACHED THE
SELECTED TEMPERATURE
Unwind the power cord completely and 5.
insert the power plug into a grounded
wall outlet.
The LCD screen will illuminate with the 6.
default brew temperature and brew
time display.
Press the left ARROW UP button 7.
until the LCD screen displays 212°F.
The 'Custom' LED will automatically
illuminate.
!
!
!
Water to Tea Scoop Ratio
Glass Jug
Marking
Cups /
Ounces
Tea
Scoops
500mL Approx.
2 Cups / 16oz
2 Scoops
750mL Approx.
3 Cups / 24oz
3 Scoops
1000mL Approx.
4 Cups / 32oz
4 Scoops
1200mL Approx.
5 Cups / 40oz
5 Scoops