Breville BTM800XL - Manuel (Page 3)

4 5
BREVILLE RECOMMENDS SAFETY FIRST BREVILLE RECOMMENDS SAFETY FIRST
We at Breville are very safety conscious and design and manufacture consumer products with the
safety of you, our valued customer, foremost in mind. In addition, we ask that you exercise a degree
of care when using any electrical appliance and adhere to the following instructions.
READ ALL INSTRUCTIONS
Carefully read all instructions before •
operation and save for future reference.
Remove and safely discard any •
packaging material and promotional
labels before using the appliance for the
fi rst time.
To eliminate a choking hazard for young •
children, remove and safely discard the
protective cover fi tted to the power plug
of this appliance.
This appliance has been designed •
specifi cally for the purpose of heating
and boiling quality drinking water and
tea only. Under no circumstances should
this product be used to heat or boil any
other liquids or foodstuffs.
Do not place the appliance near the •
edge of a bench or table during
operation. Ensure that the surface is
level, clean and free of water.
Do not place the appliance on or near a •
hot gas burner, electric element or where
it could touch a heated oven.
Keep the appliance clear of walls, •
curtains and other heat or steam
sensitive materials. Keep a minimum
8" (20cm) of space on both sides of
the appliance.
Do not operate the appliance on a sink •
drain board.
Always ensure the appliance is properly •
assembled before connecting to a
power outlet and operating. Follow the
instructions provided in this book.
The Glass Jug must be used only with the •
Power Base supplied. Do not use on a
range top.
The appliance is not intended to be •
operated by means of an external timer or
separate remote control system.
Do not touch hot surfaces. Use the handle •
for lifting and carrying the Glass Jug.
Attach the Jug Lid securely to the Glass •
Jug before operation.
Do not place anything on top of the •
Jug Lid.
Do not open the Jug Lid during operation •
as scalding may occur.
Extreme caution must be used when •
moving the Glass Jug containing hot liquid.
Use caution when pouring water from the •
Glass Jug as boiling water and steam will
scald. Do not pour the water too quickly.
To avoid scalding, never fi ll the Glass Jug •
past the 'WATER MAX' (when heating
water) or 'TEA MAX' (when brewing tea)
line markings.
Do not operate the appliance without •
water. Always fi ll the Glass Jug to at least
the 'MIN' marking. Should it be operated
without water, the boil-dry protection will
shut the power off automatically. Allow the
appliance to cool before refi lling.
IMPORTANT SAFEGUARDS
To protect against electric shock, do •
not immerse the Glass Jug base, Power
Base, power cord or power plug in water
or allow moisture to come in contact with
these parts.
Do not remove the Glass Jug from the •
Power Base during heating or when
the basket is in operation. Ensure the
appliance has completed the water
heating or tea brewing cycle before
removing the Glass Jug from the
Power Base.
The use of accessory attachments not •
recommended by Breville may result in
fi re, electric shock or injury to persons.
To turn OFF the appliance, press the •
TEA|Cancel button (when brewing tea)
or the HOT WATER|Cancel button
(when heating water) on the Power Base.
The appliance is OFF when the button
surround illumination goes out.
To disconnect from the wall outlet, fi rst •
turn OFF the appliance then remove the
power plug from the wall outlet.
When the appliance is not in use or when •
left unattended, disconnect the power
cord from the wall outlet.
Before attempting to move the appliance •
or before assembling or disassembling
parts, cleaning or storing, turn OFF the
appliance, allow to cool and disconnect
from the wall outlet.
Strictly follow the Care and Cleaning •
instructions on Page 26.
Do not use harsh abrasives or caustic •
cleaners when cleaning this appliance.
This appliance is equipped with a power •
cord having a grounding wire with a
grounding plug. The appliance must
be grounded using a 3-hole properly
grounded outlet. In the event of an
electrical short circuit, grounding reduces
the risk of electrical shock.
If the power outlet is a standard •
2-prong wall outlet, it is your personal
responsibility and obligation to have
it replaced with a properly grounded
3-prong wall outlet.
Do not, under any circumstances, cut or •
remove the third (ground) prong from the
power cord or use an adapter.
Never immerse the Glass Jug,
Power Base, power cord or
power plug in water or allow
moisture to come in contact
with these parts. !