Philips RI9946-47 - Manuel (Page 53)

45
1
4
7
2
5 6
8
3
9
Turn off the machine and unplug it .
Remove the dispensing spout and wash
it with water.
Take out the water tank and wash it with
fresh water.
Clean the pre-ground bypass doser with
a dry cloth .
General maCHine CleaninG
The cleaning procedure described below must be carried out at least once a week.
Note: If water remains in the tank for several days, do not use it.
WARNING! Never immerse the machine in water.
Clean the machine and the steam wand with a soft damp cloth. Do not use abrasive steel wool pads.
Wash the water recovery tray. After
drying it, reassemble and reinsert it in
the machine .
Take out the water recovery tray.
Remove the grill and wash it thoroughly. Remove the support under the grill . Wash
it taking care of the seal area . Reinstall
the support only after washing the inside
of the water recovery tray.
Clean ONLY the sensor with an alcohol-
soaked cloth .
Do not use abrasive steel wool pads.