Philips RI9946-47 Manuel d'utilisation
Page 51
43
12
13
18
E
11
10
C
D
A
B
B
Place a large empty container under the
dispensing spout . Rotate the upper part of
the milk carafe directly above the container .
Place a large empty container under the
dispensing spout . Rotate the upper part of
the milk carafe directly above the container .
Upon completion of the cleaning
cycle, we recommend rinsing all the
components under fresh drinking water.
REFILL WATER TANK
OK
16
POUR THE DETERGENT INTO THE CARAFE
AND FILL THE CARAFE WITH FRESH WATER
OK
14
FILL THE MILK CARAFE
WITH FRESH WATER
OK
17
CARAFE WASH CYCLE
STEP 1/2
WASH CYCLE…
15
CARAFE WASH CYCLE
STEP 2/2
RINSING CYCLE...
19
At the end of the wash, fi ll the tank with
fresh drinking water. Press the "OK"
button to confi rm.
Press the "OK" button to confi rm.
Remove the carafe, rinse and refi ll it with
fresh drinking water.
Press the "OK" button to confi rm.
The cleaning cycle is activated .
The bar shows the cycle progress.
The rinse cycle is activated. The bar shows the cycle progress.
At the end of the cycle, the machine returns to the product brew menu page.
At this stage the carafe holes (A) are
lower than the couplings (C).
The carafe pins (B) are located at the
same height of the guides (D) .
Insert the carafe by turning it towards the base through a round movement (as shown
in the fi gure), until it is hooked to the hole (E) located in the drip tray.
The carafe will be naturally back in
place .