Breville BKE820XL - Manuel (Page 16)

16
NOTE:
Always fill the kettle to between the
minimum (500) and maximum (MAX 1800)
marks on the water window on the kettle.
Too little water will result in the kettle
switching off.
Filling above the maximum mark on the
water window of the kettle may result in
boiling / heated water splashing from
the kettle.. NOTE:
Through regular use over time, scale
build-up in the kettle can affect the
performance and the life of the kettle.
Lime and phosphate are common forms
of scale that can damage your kettle.
Lime scale, a harmless mineral, comes in
the appearance of white-colored or rusty
looking build up on the inner walls of
the kettle.
phosphate scale can’t be seen, however,
it can cause the water to appear cloudy
when heated.
To prevent scale from damaging your
kettle, ensure that the kettle is de-scaled
regularly – refer to Care and Cleaning
(page 18). To avoid scale build-up, empty
the kettle after use and do not allow water
to stand in the kettle overnight.
NOTE:
The default temperature setting of
the kettle when switched on at the power
outlet is 212°F.
When the kettle is unplugged at the
power outlet and plugged back in,
it will automatically default to the 212°F
temperature setting.
When the kettle remains plugged in at the
power outlet and different temperature
settings have been selected, the kettle
will default to the last selected
temperature setting.
WARNING: DO NOT OpEN THE LID
DURING AND AFTER OpERATION.
THIS MAY RESULT IN BOILING
WATER SpLASHING FROM THE
KETTLE. pOUR ALL THE HOT
WATER FROM THE KETTLE BEFORE
OpENING THE LID TO REFILL.
NOTE:
This kettle must be used only with the
power base supplied. Use caution when
pouring water from your kettle, as
boiling / heated water and steam will
scald. Do not pour the water too quickly.
!
OpERATING YOUR BREVILLE VARIABLE TEMpERATURE KETTLE™