Bravetti FP200C - Manuel (Page 5)

OPERATING INSTRUCTIONS cont.
Multi-Mixer Assembly
Caution: Ensure that the appliance is
unplugged from the electrical
power source before changing
attachments. Do not immerse the
mixer gear box in water.
1. To attach the mixer gear box to the
Power Pack, line up arrow on the
Power Pack and Mixer Gear Box.
2. Push Power Pack onto Mixer Gear
Box until seated.
3. While grasping Mixer Gear Box rotate
it 90º clockwise until the arrow on
the Power Pack aligns with the
“Square” on the Mixer Gear Box.
4. To disassemble Mixer Gear Box and
Power Pack rotate Mixer Gear Box
90º counterclockwise.
Attaching the Attachments to the
Mixer Gear Box
Caution: Ensure that the appliance is
unplugged from the electrical
power source before changing
attachments. Do not immerse the
mixer gear box in water.
Select the desired attachment, either the
Dough Hooks, Wire Beaters or Whisk
and assemble to Mixer Gear Box as
noted below:
A) Dough Hooks (2)
For use with light dough ONLY.
• Insert stem end of dough hooks (one
at a time) into opening in base of
Mixer Gear Box.
• Rotate slightly while pressing gently
until dough hook “Clicks” into place.
• Repeat for second dough hook.
• Ensure that dough hooks are well
seated in Mixer Gear Box.
B) Wire Beaters (2)
Follow same installation procedure as
above.
C) Wire Whisk
This attachment is used for beating
air into mixtures such as egg whites,
yolks or creams..
• To install, place stem of Wire Whisk
into either of the openings in the
Mixer Gear Box.
• Rotate Wire Whisk while pushing
gently until Wire Whisk “Clicks” into
place.
• Ensure that Wire Whisk is well
seated in Mixer Gear Box.
1. After attaching the desired accessory
into the mixer gear box, plug the
mixer into power source.
2. Hold the power pack with one hand
and press and hold the On/Off switch
with your index finger.
3. Ensure that there are no obstructions
and that the accessories are moving
freely in the mixing container.
4. When finished using the unit, unplug
the unit before removing the
accessories.
7
OPERATING INSTRUCTIONS cont.
Care & Maintenance
Caution: Ensure that the appliance is
unplugged from the electrical
power source before changing or
cleaning attachments. Do not
immerse the mixer gear box in water.
1. The unit and the various attachments
should be cleaned after each use.
2. All accessories and glass beaker can
be cleaned with warm soapy water.
3. Use a damp cloth or sponge to clean
the housing of the power pack. Do
NOT immerse in water or any other
liquid.
Caution: Use extreme caution when
cleaning the chopper blade or
metal stick blender because blades
are SHARP.
Storing Your Unit
You may store your unit in the wall
bracket provided. Do NOT wrap power
cord around unit. Coil the cord in
loose loops and tie with a tye wrap or
twist tie.
It is recommended that the chopping
blade be stored inside the glass
beaker as blade is very sharp.
8