Cable connection, Ip passthrough, Set up a data cable to use ip passthrough – Nokia E70 Manuel d'utilisation

Page 44: Access point for ip passthrough, Advanced ip passthrough access point settings

Advertising
background image

Homepage

— Enter the Web address of the page you want to display as a home page when you use this access point.

The settings available for editing may vary.

Advanced Internet access point settings for wireless LAN

Select

Menu

>

Tools

>

Settings

>

Connection

>

Access points

.

After setting up a basic Internet access point for wireless LAN, select

Options

>

Advanced settings

, and define the following

advanced settings.

IPv4 settings

— Enter the device IP and name server addresses for the IPv4 Internet protocol.

IPv6 settings

— Select or enter the name server addresses for the IPv6 Internet protocol.

Ad-hoc channel

— If the selected network mode is ad-hoc, select

User defined

to manually enter a channel number (1-11).

Proxy serv. address

— Enter the proxy server address.

Proxy port number

— Enter the proxy server port number.

The settings available for editing may vary. Contact your service provider for more information.

Cable connection

Install the USB data cable driver to your PC before you use a cable connection. You can use the

Data transfer

without installing

the USB data cable drivers.
Select

Menu

>

Connect.

>

Data cbl.

.

Using a USB data cable, you can connect your device to a compatible PC . Connect the USB data cable to the bottom of the device.

To change the device type you normally connect to your device with the data cable, press the joystick.
Select from the following:

Ask on connection

— Select whether you want to be asked for the device type every time you connect the data cable to your

device.

PC Suite

— Connect the PC Suite to your device with the data cable, and use your device as a modem.

Data transfer

— Access and transfer data such as music or image files from your computer using the data cable connection.

To use the

Data transfer

mode, make sure that you have not selected USB as a connection type in the Manage connections

settings in Nokia PC Suite. Insert a memory card to your device, connect the device to a compatible computer with the USB

data cable, and select

Data transfer

when the device asks which mode is used. In this mode, your device acts as a mass storage

device and you can see it as a removable hard drive in your computer. The device will switch into the

Offline

profile if this is

selected. End the connection from the PC (for example, from an Unplug or Eject Hardware wizard in Windows) to avoid

damaging the memory card. After you end the connection, the device returns to the profile in which it was before using the

data transfer mode.

IP passthrough

— Select an access point through which to transfer data using the Internet protocol.

To save your selection, select

Back

.

IP passthrough

Select

Menu

>

Connect.

>

Data cable

>

Options

>

IP passthrough

.

The

IP passthrough

application allows you to obtain a network connection on your device from a compatible PC through a data

cable.

Set up a data cable to use IP passthrough

Use IP passthrough as you use any Internet access point to browse or synchronize remotely. If a wireless network connection

is unavailable, use IP passthrough to access the Internet or a LAN. You cannot use IP passthrough at the same time as Nokia PC

Suite. You cannot activate the modem if you select IP passthrough in cable connection settings.
To prepare for an IP passthrough session, connect a data cable to your device, and select

IP passthrough

as the connection

method. Connect the other end of the data cable to a compatible PC, and wait for the PC to recognize your device.

Access point for IP passthrough

Menu

>

Tools

>

Settings

>

Connection

>

Access points

.

To configure IP passthrough basic settings, select

Options

>

New access point

>

Use default settings

. Enter a name for your IP

passthrough connection in the

Connection name

field, and select

IP passthrough

in the

Data bearer

field.

Advanced IP passthrough access point settings

Menu

>

Tools

>

Settings

>

Connection

>

Access points

.

To use advanced settings, open an IP passthrough access point, and select

Options

>

Advanced settings

and select from the

following:

C o n n e c t i v i t y

Copyright © 2006 Nokia. All Rights Reserved.

44

Advertising