Register ptt channels, Join a channel, Push to talk log – Nokia E70 Manuel d'utilisation

Page 23: Exit push to talk, Net calls, Preferred profile

Advertising
background image

Channel name

— Write the channel name.

Channel privacy

— Select

Private

or

Public

.

Nickname in channel

— Enter your nickname (20 characters maximum) that is displayed to other users.

Channel thumbnail

— Insert a picture that describes the channel.

To delete a channel, press the clear key.
When you log in to push to talk, push to talk automatically connects to the channels that were active when the application was

last closed.

Register PTT channels

To register a channel to the push to talk service, select

Options

>

Register

.

To edit the channel details, select

Options

>

Edit

.

Join a channel

To join a channel, select

Options

>

PTT channels

. Select the channel you want to talk to, and press the voice key. Remember to

hold the device in front of you during a push to talk call so you can see the display. The display informs you when it is your turn

to speak. Speak towards the microphone, and do not cover the loudspeaker with your hands. Press and hold the voice key the

entire time you are talking. When you have finished talking, release the key.
To switch between channels during multiple calls, select

Swap

. The active channel is highlighted.

To view the currently active participants in the channel, select

Options

>

Active members

.

To invite a participant to a channel, select

Options

>

Send invitation

.

Push to talk log

To open the push to talk log, select

Options

>

PTT log

. The log shows the date, time, duration, and other details of your push to

talk calls.

Tip: To initiate a one-to-one call from

PTT log

, select the desired log event and press the voice key.

Exit push to talk

Select

Options

>

Exit

. Select

Yes

to log out and close the service. Press

No

if you want to keep the application active on the

background.

Net calls

Your device supports voice calls over the Internet (Internet calls). Your device attempts emergency calls primarily over cellular

networks. If an emergency call using cellular networks is not successful, then your device attempts an emergency call through

your Internet call provider. Due to the established nature of cellular telephony, you should use cellular networks for emergency

calls, if possible. If you have cellular network coverage available, please make sure that your cellular phone is switched on and

ready to make calls before you attempt an emergency call. The capability for an emergency call using Internet telephony depends

on the availability of a WLAN network and your Internet call provider's implementation of emergency call capabilities. Contact

your Internet call provider to check the Internet telephony emergency call capability.
VoIP (voice over Internet protocol) technology is a set of protocols that facilitate phone calls over an IP network, such as the

Internet. VoIP phone calls can be established between computers, between mobile phones, and between a VoIP device and a

traditional telephone. To make or receive a VoIP call, your device must be within WLAN coverage, for example.
Before you can make net calls, you need to create a net telephone profile. When the profile is ready, you can make a net call

from all applications where you can create a regular voice call. To make a net call in standby mode to an address that does not

start with a digit, press any number key, then press # for a few seconds to clear the display and to switch the device from number

mode to letter mode. Write the address and press the call key. If you have the fold open, and you have created a net telephone

profile, write the address and press the call key.
You must define session initiation protocols (SIP) settings in

Menu

>

Tools

>

Settings

>

Connection

>

SIP settings

and VoIP

settings in

Menu

>

Tools

>

Settings

>

Call

and

Menu

>

Tools

>

Settings

>

Call

>

Connection

. Contact your service provider for

more information and correct settings.

Preferred profile

Select

Menu

>

Connect.

>

Internet tel.

to change settings.

Before you can select the default profile, you must create profiles in

Menu

>

Tools

>

Settings

>

Connection

>

Internet tel.

settings

.

To select the profile that is used by default when you make net calls, select

Preferred profile

, and press the joystick. Scroll to the

desired profile, and press the joystick.

M a k e c a l l s

Copyright © 2006 Nokia. All Rights Reserved.

23

Advertising