Nokia E70 - Manuel (Page 14)

Display indicators
The device is being used in a GSM network. The bar next to the icon indicates the signal strength of the network at your
current location. The higher the bar, the stronger the signal.
The battery charge level. The higher the bar, the stronger the charge in the battery.
You have one or more unread messages in the Inbox folder in Messag. .
You have received new e-mail in the remote mailbox.
You have one or more missed phone calls.
An alarm is active.
You have selected the silent profile, and the device does not ring for an incoming call or message.
Bluetooth is activated.
An infrared connection is active. If the indicator blinks, your device is trying to connect to the other device, or the connection
has been lost.
A GPRS or EGPRS packet data connection is available.
A GPRS or EGPRS packet data connection is active.
A GPRS or EGPRS packet data connection is on hold.
You have set the device to scan for wireless LANs, and a wireless LAN is available.
A wireless LAN connection is active in a network that does not have encryption.
A wireless LAN connection is active in a network that has encryption.
Your device is connected to a PC with a USB data cable.
A data call is active.
IP passthrough is active.
and Indicate the phone line that you have selected, if you have subscribed to two phone lines (network service).
All calls are forwarded to another number.
A headset is connected to the device.
The connection to a headset with Bluetooth connectivity has been lost.
A hands-free car kit is connected to the device.
A loopset is connected to the device.
A Text phone is connected to the device.
Your device is synchronizing.
You have an ongoing push to talk connection.
Volume control
Warning: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be extremely
loud.
To adjust the volume during a call, scroll left or right.
To adjust the volume when using the loudspeaker, scroll left or right.
Write text
Traditional text input
is shown on the top right of the display when you are writing text using traditional text input.
and indicate the selected case. indicates that the first letter of the word is written in uppercase and all the other
letters will automatically be written in lowercase. indicates number mode.
• Press a number key 1–9 repeatedly until the desired character appears. There are more characters available for a number key
than are printed on the key.
• To insert a number, press and hold the number key.
• To switch between letter and number mode, press and hold #.
G e t s t a r t e d
Copyright © 2006 Nokia. All Rights Reserved. 14