AEG F77012M0P - Manuel (Page 34)

2. Make sure that the appliance is in
setting mode. Refer to ‘SETTING
AND STARTING A PROGRAMME’.
3. Press and hold Delay and Start at
the same time until the indicators (A),
(B) and (C) flash.
4. Press Option .
• The indicators (A) and (C) go off.
• The indicator (B) continues to flash.
• The display shows the setting of
the rinse aid dispenser.
Off
On
5. Press Option to change the setting.
6. Deactivate the appliance to confirm.
7. Adjust the released quantity of rinse
aid.
8. Fill the rinse aid dispenser.
11. INSTALLATION
WARNING!
Refer to “SAFETY INFORMA-
TION”.
11.1 Installation under a kitchen counter
570-600 mm
600 mm
820 mm
1. Make sure that the dimen-
sions of the recess agree with
the dimensions in the figure.
2. Put the appliance adjacent to
a water tap and a water drain.
34 www.aeg.com