1 using the detergent, 2 setting and starting a programme setting mode, Starting a programme without delay start – AEG F77012M0P Manuel d'utilisation

Page 29: Starting a programme with delay start, Opening the door while the appliance operates

Advertising
background image

7.1 Using the detergent

20

30

M AX

1

2

3

4

+

-

A

B

C

1.

Press the release button (B) to open
the lid (C).

2.

Put the detergent in the compart-
ment (A) .

3.

If the programme has a prewash
phase, put a small quantity of deter-
gent on the inner part of the appli-
ance door.

4.

If you use detergent tablets, put the
tablet in the compartment (A).

5.

Close the lid. Make sure that the re-
lease button locks into position.

7.2 Setting and starting a
programme

Setting mode

The appliance must be in setting mode
to accept some operations.
The appliance is in setting mode when,
after the activation:
• All the programme indicators come

on.

• The display shows two horizontal sta-

tus bars.

If the control panel shows other condi-
tions, press and hold Delay and Start at
the same time until the appliance is in
setting mode.

Starting a programme without
delay start

1. Open the water tap.
2. Press the on/off button to activate

the appliance.

3. Close the appliance door.
4. Make sure that the appliance is in

setting mode.

5. Press Program again and again until

the indicator of the programme that
you want to set comes on.
• The programme duration flashes in

the display.

• The phase indicators of the set

programme come on.

6. If you want, you can set the options.
7. Press Start. The programme starts.

• Only the indicator of the phase in

operation stays on.

• The display shows the programme

duration that decreases with steps
of 1 minute.

Starting a programme with
delay start

1. Set the programme and the options.
2. Press Delay again and again until the

display shows the delay time you
want to set (from 1 to 24 hours).
• The delay time flashes in the dis-

play.

• The delay indicator is on.

3. Press Start. The countdown starts.

• The display shows the countdown

of the delay start that decreases
with steps of 1 hour.

• The phase indicators of the set

programme go off.

• When the countdown is completed,

the programme starts.
– The indicator of the phase in opera-

tion comes on.

Opening the door while the
appliance operates

If you open the door, the appliance
stops. When you close the door, the ap-
pliance continues from the point of inter-
ruption.

ENGLISH

29

Advertising
Ce manuel est liée aux produits suivants: