Napoleon Fireplaces EPI3C - Manuel (Page 15)

W415-1087 / A / 06.06.13
15
EN
!
WARNING
5.2 BRICKS AND BAFFLE INSTALLATION
With the appliance and chimney installation completed, move the bricks into place as illustrated below. Ensure
the fi rebox insulation (W361-0189) is in good condition prior to proceeding. Replace if necessary.
A. Install the 2 side bricks (W090-0191 & W090-0192) against the sides of the fi rebox, secure using the
retainers.
B. Install the back brick (W090-0190) by sliding it under and behind the rear secondary air tubes, secure
using with retainers.
C. Install the 2 bottom bricks (W090-0193 & W090-0194).
D. Slide the front brick (W090-0196) into place in front of the bottom bricks with the angled edge sitting
fl ush with the bottom bricks.
E. Install the front ledge brick (W090-0195) so that the notches line up with the fi re grate slots.
F. Place the fi bre baffl e (W018-0133) on top of the secondary air tubes and slide it all the way to the rear
of the fi rebox. Hint: this may require the front secondary air tube to be removed.
OPERATION OF THE APPLIANCE WITHOUT THE BAFFLES CAN RESULT IN EXCESSIVE
TEMPERATURES THAT COULD DAMAGE THE APPLIANCE, CHIMNEY AND THE SURROUNDING
ENCLOSURE.
W018-0133
W090-0190 W090-0191
W090-0192
W090-0194
W090-0193
W090-0195
W090-0196
W361-0189