Napoleon Fireplaces Outdoor Torch - GSST8 - Manuel (Page 15)

15
W415-0689 / C / 06.13.12
1/4”
( APPROX.)
CONTROL
DOOR
1/4”
( APPROX.)
LOGO
With the control door closed, affi x the logo to the front face of
the control door at the bottom left corner.
5.5 TFSSO FRAME INSTALLATION
DOOR
CHAIN
SLOT
FRAME
(REAR VIEW)
TRIM
BRACKET
TRIM
BRACKET
5.6 LOGO PLACEMENT
A. Hang the frame onto the fi rebox by
engaging the top trim bracket into the
slot in the top of the frame and the
bottom hooks of the frame into the slot
in the mounting cabinet.
B. Install the trim bracket supplied in your
manual baggie to the fi rebox using 3
screws.
NOTE: If the frame needs to be secured, use
two screws in the holes provided behind the
control door.
Insert the door stop chain into the receiving slot
in the control door. Then insert the door chain
into the receiving slot in the frame so that when
fully opened the control door has a clearance of
1/8” to the mounting cabinet.
NOTE: In most cases a count of 15 balls on
the chain between receiving slots will be
suffi cient.