Napoleon Fireplaces EF39HD - Manuel (Page 14)

W415-0752 / D / 02.03.12
14
A. Remove the 2 screws on the bottom left and right corner of the appliance behind the front panel.
B. Remove the 2 screws holding the main power switch and pull switch down carefully. Before removing
the wires we recommend labelling the 3 wires on the switch.
C. Lift up and remove the front panel of the appliance.
D. Locate the 2 ember bed bulbs as shown.
E. Remove spring clip. Hold socket and pull out old bulb.
F. Hold socket and push in new bulb (DO NOT exceed wattage). Reattach spring clip.
G. Repeat steps 4 and 5 for the remaining bulb if necessary.
H. Replace the front panel and the screws.
I. Re-install the 3 wires onto the main power supply switch ensuring the wires are in the correct location.
J. Re-install the switch with the 2 screws that were removed.
Ember Bed Bulb Replacement Ember Bed Bulb Location
Front View Front View
Ember Bed Bulbs with spring clips
Ember Bed Bulb Replacement Ember Bed Bulb Replacement
Screw
Back View
Screw
2 screws
Left Right
6.2 REPLACING THE EMBER BED LIGHT BULBS
Screws
Switch
wires