Sony STR-LSA1 - Manuel (Page 16)

16 GB
Adjusting the Sound
5 Press ENTER and rotate the jog dial to set the
selected parameter.
Each parameter can be set in a range of –10 dB to +10
dB in 1-dB steps.
6
If you want to set other parameters, repeat steps 4
and 5.
z You can use the remote to adjust the tone parameters
Press BASS+/–, MID +/–, or TREBLE +/–.
Checking the parametric equalizer
settings (Parametric EQ1 to 3)
1
Do steps 1 to 3 in “Selecting an equalizer setting”
on page 15 to select the parametric equalizer
setting to be checked.
The settings can be checked for the patterns stored in
Parametric EQ1 to 3 only.
2 Press JOG MENU repeatedly until “Sound Menu”
appears in the display.
3 Rotate the jog dial until “EQ Condition” appears in
the display.
“EQ Condition” doesn’t appear if a pattern in EQ1 to 5
or EQ FLAT has been selected.
4 Press ENTER and rotate the jog dial to select the
parameter to be checked.
One of the nine parameters appears in the display.
Rotate the jog dial to display next parameter.
The normal display will reappear after several
seconds.
Storing adjusted parameters
1
Do steps 1 to 6 in “Setting the equalizer
parameters” on page 15 and this page to adjust
the parameter(s).
2
Press JOG MENU repeatedly until “Sound Menu”
appears in the display.
3 Rotate the jog dial until “EQ Memory” appears in
the display, then press ENTER again.
“Memory to EQX?” appears in the display. “X,” which
appears as a number from 1 to 5, is the number of the
currently selected preset pattern in EQ BANK
submenu.
Setting Sound Parameters
4 Press ENTER to overwrite the parameter(s) of
current preset setting with new parameter(s). If
you don’t want to overwrite the parameters,
rotate the jog dial to select the number of a preset
setting where the adjusted parameter(s) is (are) to
be stored, then press ENTER.
“Memorized EQX” appears for a few seconds, and
then the normal display reappears. “X” is the number
of the setting selected to store the parameter(s).
z
You can reset the contents of the preset equalizing patterns
to their factory settings
See page 25.
Adjusting the speaker balance
1
Press JOG MENU repeatedly until “Sound Menu”
appears in the display.
2
Rotate the jog dial until “SP. Balance” appears in
the display, then press ENTER.
3
Rotate the jog dial to adjust the speaker balance.