Appendix – Samsung HT-E6730W-ZA Manuel d'utilisation

Page 56

Advertising
background image

|

56

English

Appendix

Settings

Anynet+ (HDMI-CEC)

• Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user

manual of your TV.

• This function is not available if the HDMI cable does not support CEC.

• If your Samsung TV has an Anynet+ logo, then it supports the Anynet+ function.

BD Data Management

• In the external memory mode, disc playback may be stopped if you disconnect the USB device in

the middle of playback.

• Only those USB devices formatted in the FAT file system (DOS 8.3 volume label) are supported.

We recommend you use USB devices that support USB 2.0 protocol with 4 MB/sec or faster
read/write speed.

• The Resume Play function may not work after you format the storage device.

• The total memory available to BD Data Management may differ, depending on the conditions.

Front Display

• You cannot change the brightness of the

button and the VOL +, - button.

Speaker Settings

• When Speaker Selection is set to TV Speaker, audio is produced through the TV speakers.

• Running the Auto Sound Calibration function takes about 3 minutes.

• Make sure there is no disc in the product when you run the Auto Sound Calibration function.

• If the ASC microphone is disconnected during the Auto Sound Calibration setup, the setup will be

canceled.

• When the Auto Sound Calibration function is activated, the DSP, Dolby Pro Logic ll and SFE Mode

will not work.

• If the product is connected to external devices or other components (such as an iPod, AUX,

D. IN), the Auto Sound Calibration Setup may not work properly.

HDMI audio

• When HDMI audio is output to the TV speakers, it is automatically down-mixed to 2 channels.

Audio Return Channel

• When Anynet+ (HDMI-CEC) is Off, the Audio Return Channel function is not available.

• Using an HDMI cable not certified for ARC (Audio Return Channel) may cause a compatibility

problem.

• The ARC function is only available if an ARC-compliant TV is connected.

Digital Output

• Digital Output can be activated when Speaker Selection is set to TV Speaker.

HT-E6730W_ZC_0314.indd 56

HT-E6730W_ZC_0314.indd 56

2012-03-14 오후 3:49:32

2012-03-14 오후 3:49:32

Advertising