Samsung HT-E6730W-ZA - Manuel (Page 36)

| 36
English
Settings
Through the Product Using PBC
1 . Select the Wi-Fi Direct device you want to
connect to this product, and then press the
E button. The PBC/PIN pop up appears.
2 . Select PBC, and then press the E button.
The PBC pop-up appears.
3 . Press the PBC button on the Wi-Fi Direct
device within 2 minutes.
4 . The Connecting pop-up appears, followed
by the Connected pop-up. When it closes,
you should see the device listed on the Wi-Fi
Direct screen as connected.
Through the Product Using a PIN
1 . Select the Wi-Fi Direct device you want to
connect to this product, and then press the
E button. The PBC/PIN pop up appears.
2 . Select PIN, and then press the E button.
The PIN pop-up appears.
3 . Note the PIN code in the pop-up, and then
enter it into the appropriate field in the Wi-Fi
Direct device you want to connect.
4 . The Connecting pop-up appears, followed
by the Connected pop-up. When it closes,
you should see the device listed on the Wi-Fi
Direct screen as connected.
| NOTE |
\ The wired or wireless network connection will be
disconnected when you use the Wi-Fi Direct function.
Soft AP
Soft AP lets you connect other Wi-Fi devices to
your network through the product and lets them
access the Internet.
It requires that you create a security key which you
must enter into the other Wi-Fi devices when you
are connecting them to the network.
1 . In the Home screen, select Settings, and
then press the E button.
2 . Select Network, and then press the E
button.
3 . Select Soft AP, and then press the E
button.
4 . Select On or Off, and then press the E
button.
< To Set the Soft AP Security Key >
1 . On the Soft AP screen, select Security Key,
and then press the E button. The Security
Key screen appears.
2 . On the Security key screen, enter a security
key. Enter numbers directly using the number
buttons on your remote control. Enter
letters by selecting a letter with the ▲▼◄►
buttons, and then pressing the E button.
3 . When done, use the ▲▼◄► buttons to
move to DONE at the bottom of the screen,
and then press the E button.
When you connect a Wi-Fi device through the
connection procedure on the device, you must
enter the security key you created here into the
appropriate field.
AllShare Settings
The AllShare Settings screen lists your network
connected AllShare devices and their IP
addresses. Through this screen, you can allow
a device to access the product, deny access, or
delete the device from the AllShare list.
1 . In the Home screen, select Settings, and
then press the E button.
2 . Select Network, and then press the E
button.
3 . Select AllShare Settings, and then press the
E button.
4 . Select a device, and then press the E
button. The AllShare Settings pop-up
appears.
5 . Select Allow, Deny, or Delete from List, and
then press the E button.
The AllShare Settings screen only displays devices
if you have established networked connections
to AllShare devices. For more information about
AllShare networked devices, see pages 39~40.
HT-E6730W_ZC_0314.indd 36 HT-E6730W_ZC_0314.indd 36 2012-03-14 오후 3:48:51 2012-03-14 오후 3:48:51