Samsung NX58F5700WS-AA - Manuel (Page 28)

28_ installation instructions
installation instructions
INSTALLINg YOUR gAS RANgE
IMPORTANT: Please read the following instructions, as well as the Important Safety
Instructions section at the front of this manual, completely and carefully BEFORE
installing and/or operating the gas range. Improper installation, adjustment, service, or
maintenance can cause personal injury or property damage.
To order parts or accessories, contact your
local retailer or refer to the last page .
To ensure proper installation, we strongly
recommend that you hire a professional
installer.
Step 1. Unpack the range
Remove all packaging materials. Failure to remove packaging materials could
result in damage to the appliance.
Inventory all loose parts against the Parts supplied± components listed on page 27.
Check for shipping damage and/or missing parts. Any damage and/or missing
parts should be reported to your local retailer.
Step 2. Connect the range to gas supply
Shut off the main gas supply valve before disconnecting the old range and
leave it off until the new hookup has been completed. Don’t forget to relight
the pilot on other gas appliances when you turn the gas back on.
Because hard piping restricts movement of the range, the use of a CSA
International-certified flexible metal appliance connector is recommended unless
local codes require a hard-piped connection.
130521_(Install)_NX58F5700WS_DG68-00518A_EN+CFR.indb 28 04/06/2013 17:45:49