Electrolux EDC78550W - Manuel (Page 14)

WHAT TO DO IF ...
Troubleshooting by yourself
If, during operation, the error code E... plus
number or letter) appears on the multi-dis-
play: Switch the appliance off and on again. Reset programme. Press the START/
PAUZE (START/PAUSE) button. If the error
appears again, please contact the Custom-
er Care Department, stating the error code
Problem Possible cause Remedy
Dryer does not work.
Mains plug is not plugged in or
fuse is not working correctly.
Plug in at mains socket. Check
fuse in fuse box (domestic installa-
tion).
Loading door is open. Close loading door.
Have you pressed the START/
PAUZE (START/PAUSE) button? Press the START/PAUZE (START/
PAUSE) button again.
Drying results unsatisfac-
tory.
Wrong programme selected.
Select a different programme the
next time you dry (see “Pro-
gramme overview” chapter).
Lint filters clogged. Clean lint filters.
Fluff filter clogged. Clean fluff filter.
Heat exchanger clogged with lint. Clean heat exchanger.
Overloading of laundry.
Observe recommended loading
volumes.
Ventilation slots in base area cov-
ered up. Uncover ventilation slots in base
area.
Residue on inside surface of drum
or drum ribs. Clean inside surface of drum and
drum ribs.
Conductance of water at installa-
tion site differs from standard set-
ting of machine. Re-programme standard setting
for degree of drying (see ‘Program-
ming options’ chapter).
When a button is pressed
- no reaction of the ma-
chine. Drying protection. After the start of
the programme, the option can no
longer be set.
Turn the programme knob to O
off . Set the programme again.
Drum light does not work.
Programme selector in O off posi-
tion. Turn programme selector to any
programme.
Defective light bulb.
Replace light bulb (see next sec-
tion).
Displayed programme
time changes erratically
or stays unchanged for a
long time. Programme time is corrected auto-
matically depending on type and
volume of laundry and level of
dampness.
Automatic process; this is not a
machine fault.
Programme inactive,
CONTAINER display illu-
minated.
Condensate tank is full.
Empty condensate tank, then start
programme with START/PAUZE
(START/PAUSE) button.
Drying cycle ends shortly
after programme starts.
ANTICREASE (ANTI-
CREASE) light is on.
Not enough washing loaded or
washing loaded is too dry for selec-
ted programme.
Select time programme or higher
drying level (e.g.
Extra droog
(EXTRA) instead of Kast droog
(CUPBOARD).
14 electrolux