Salamander Designs PM100/S - Manuel (Page 8)

800-898-9005
PM100/S Salamander Designs Ltd. 8
19 13 26 Collar nut 6 mm
x 4 x 4
Screw 6 x 20 mm
x 1
Allen wrench #3
3
WARNING: Make sure the wires stay in the channel as shown in
step B4. Pinching or crushing cables can cause malfunction or injury.
B5 Combine PILOTMOTION unit and mounting plate with fasteners
B6 Break off corner of bottom cap to allow wires to pass
B7 Insert plastic caps on top and bottom
!