MAX AKHL1250E - Manuel (Page 7)

7
1. NEVER TOUCH MOVING PARTS
Never place your hands, fingers or body
parts near the compressor's moving parts.
2. NEVER OPERATE WITHOUT ALL
GUARDS IN PLACE
Never operate the compressor without all guards
or safety features in place and in proper working
order. If maintenance or servicing requires the
removal of a guard or safety features, be sure to
replace the guards or safety feature before re-
suming operation of the compressor.
3. ALWAYS WEAR EYE PROTECTION
Always wear safety goggles or equivalent eye
protection. Compressed air must never be aimed
at anyone or any part of the body. Be sure to wear
protective gear including the sound-proofing and
protective garment, crash cap and safety foot-
wear suited for the given working environment.
4. PROTECT YOURSELF AGAINST ELEC-
TRIC SHOCK
Prevent body contact with grounded surfac-
es such as pipes, radiators, ranges and re-
frigeration enclosures. Never operate the
compressor in damp or wet locations.
5. DISCONNECT THE COMPRESSOR
Always disconnect the compressor from the pow-
er plug and remove the compressed air from the
air tank before servicing, inspecting, maintaining,
cleaning, replacing or checking any parts.
6. AVOID UNINTENTIONAL STARTING
Do not carry the compressor while it is con-
nected to its power source or when the air
tank is filled with compressed air. Be sure
the knob of the pressure switch in the "OFF"
position before connecting the compressor
to its power source.
7. STORE COMPRESSOR PROPERLY
When not in use, the compressor should be
stored in dry place. Keep out of reach of chil-
dren. Lock-out the storage area.
8. KEEP WORK AREA CLEAN
Cluttered areas invite injuries. Clear all work ar-
eas of unnecessary tools, debris, furniture, etc.
9. KEEP CHILDREN AWAY
Do not let visitors contact compressor extension
cord. All visitors should be kept safely away from
work area. Keep out of reach of children.
10. DRESS PROPERLY
Do not wear loose clothing or jewelry. They
can be caught in moving parts. Wear protec-
tive hair covering to contain long hair.
11. DON'T ABUSE POWER CORD
Never yank it to disconnect from receptacle.
Keep power cord from heat, oil and sharp edges.
12. MAINTAIN COMPRESSOR WITH CARE
Follow instructions for lubricating. Inspect
cords periodically and if damaged, have re-
paired by authorized service facility.
13. USE A SAFE EXTENSION CORD
In order to prevent an electric shock, use a 3-
core extension cord with a 3-pole earthing
plug and a 3-core earthing plug socket.
Make sure that the extension cord is in the
good working condition. If the cord is dam-
aged, replace or repair it. The cord should
have a sufficient capacity for the current run-
ning to the product. The cord of an insuffi-
cient capacity will cause a voltage drop or an
electric power loss, resulting in overheating.
The following table shows the cord size used
depending on the cord length.
If the compressor is to be used outdoors, use
an exclusive extension cord.
Tab.1 GAUGE A MAX LENGTH OF 50ft. (15m)
Avoid electrical shock hazard. Never use this
compressor with a damaged or frayed electrical
cord or extension cord. Inspect all electrical
cords regularly. Never use in near water or in any
environment where electric shock is possible.
14. STAY ALERT
Watch what you are doing. Use common
sense. Do not operate compressor when you
are tired. Compressor should never be used by
you if you are under the influence of alcohol,
drugs or medication that makes you drowsy.
COMPRESSOR HP kW American Wire
Gauge
AKHL1250E 2 1.5 12
WARNING