MAX AKHL1250E - Manuel (Page 11)

11
3. NEVER USE THE MACHINE IN AN UN-
STABLE PLACE.
Never use it in a place where it could move
or fall of itself.
Be sure to install the compressor on a flat
floor, with leg rubber underneath it; the al-
lowable tilt angle of the floor is up to 10 de-
grees. If the installation floor is tilted and
slippery, ensure that the compressor does
not move during operation. Do not use it on
a shelf or a stand where it may fall or tumble.
4. AVOIDING A PLACE EXPOSED TO HIGH
TEMPERATURE OR THE DIRECT SUN-
SHINE, BE SURE TO USE THE MACHINE
IN THE WELL-VENTILATED SHADE.
Using it under high temperature or in the di-
rect sunshine not only deteriorates its dura-
bility, but increases the temperature of the
main body, causing danger to your safety.
Be sure to use it in the well-ventilated shade.
The adequate room temperature is 41 °F to
86 °F (+5 °C to +30 °C). (32 °F to 104 °F
(0 °C to +40 °C) at maximum)
5. DO NOT INSTALL THE MACHINE IN A
DUSTY(WOODEN CHIPS, ETC.) PLACE.
6. INSTALL THE MACHINE IN THE APPRO-
PRIATE DIRECTION.
Install it appropriately.
7. NEVER INSTALL THE MACHINE IN THE
RAIN OR IN A PLACE SPLASHED WITH
WATER OR EXPOSED TO HIGH TEMPER-
ATURE.
Using it in the wet condition could cause an
electric shock or a short-circuit, resulting in a
fire due to burnout or ignition.
8. NEVER BLOCK A VENTILATION OPEN-
ING OR USE THE MACHINE IN A BOX OR
A NARROW PLACE(IN A VEHICLE, ETC.)
Neglect of this may generate abnormal heat,
causing a trouble or an accident.
Install the compressor at the distance of 1 m
or more from the wall to secure sufficient
ventilation and cooling.
9. NEVER SIT OR PLACE AN OBJECT ON
THE TOP OF THE MACHINE.
Neglect of this could cause a trouble or
break it.
Do not use the compressor in any place where
the temperature is 32 °F (0 °C) or less or the
ambient temperature exceeds 104 °F (+40 °C).
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING