Verilux VA04 - Manuel (Page 13)

13
Operating Instructions — continued
2. Select by pressing the Back button or the Forward button
repeatedly. Press the
Set
button to confirm the desired selection. The chosen
icon will flash.
3. When the Sleep icon is chosen, the lamp brightness will increase to the last
level set. Use the Back button or the Forward button to set a new
final brightness level for the Sleep Cycle.
• Press the
Set
button to confirm.
Displaying Alarm Settings
Press the
Alarm
button repeatedly to cycle between displaying:
• AL1 – Alarm 1 Setting
• AL2 – Alarm 2 Setting
• Both Alarms
Snooze
When the alarm sounds, you may press down on the top of the
Rise & Shine ® – as you would a button – to Snooze.
Sunrise Simulator
Beginning 15 minutes before the alarm set time, the light will
gradually increase in intensity to simulate sunrise. There are 20
possible light levels. The final brightness level, which may be any
level between 1 and 20, is set as described on page 12 under Setting the Alarm
and Sleep Cycle Brightness.
Starting a Sleep Cycle
A sleep cycle simulates diminishing sunset lighting by beginning with the lamp on
maximum brightness, or the highest brightness you previously set, with the light
progressively dimming for the duration of the cycle until the lamp is off at the end
of the cycle.
You may start a sleep cycle whenever you wish:
• Press the
Sleep
button to begin a sleep cycle.
• The minutes remaining in the sleep cycle are shown on the display.
• Press the
Sleep
button repeatedly to choose 0, 5, 15, 30 or 60 minutes.
• To manually end the Sleep cycle, press the
Off
Button, or press the
Sleep
button
repeatedly until you reach “00”. You will need to manually turn the lamp and/or
radio on, if you wish to do so.
Display Dimmer
To adjust the LCD display brightness to Off, Normal or Bright setting, press the
Display button repeatedly for the desired brightness.
Press to
Snooze