UTStarcom PPC-6700 - Manuel (Page 97)

Section 6: Getting Connected Section 6: Getting Connected 91 Section 6: Getting Connected Section 6: Getting Connected
6. Tap to disconnect active data services (such as using the
1XRTT or EVDO dialup connection). You cannot reconnect
data services in Comm Manager.
7. Tap to synchronize the device and computer via ActiveSync.
For more information about the configuration settings for
ActiveSync, see Section 4.
Connect to a Wi-Fi network
1. On the Comm Manager screen, tap the Wi-Fi button to turn
on/off the wireless function.
2. Tap Settings > Wi-Fi Settings to configure the required
settings. When the configuration is completed, you can
connect to a Wi-Fi network using your device.
Note:
Tap the Network Cards icon ( ) on the Wi-Fi Settings screen
to configure wireless networks and network adapters.
To save battery power while connected to a
Wi-Fi network:
1. On the Settings tab of the Wi-Fi Settings screen, move
the Power Save Mode slider to a position that optimizes
performance with the least
power consumption.
2. Select the Auto turn off WLAN if not connected check box
to allow your PPC-6700 to turn off the WLAN function
automatically when no signal is detected.