UTStarcom PPC-6700 - Manuel (Page 70)

64 Section 5: Managing Your PPC-6700 Section 5: Managing Your PPC-6700 Section 5: Managing Your PPC-6700 Section 5: Managing Your PPC-6700
To change the device name:
1. Tap Start > Settings > System tab >About > Device ID tab.
2. Enter a name:
The device name must begin with a letter, consist of letters
from A to Z, numbers from 0 to 9, and cannot contain spaces.
Use the underscore character to separate words.
Why is the device name important?
The device name is used to identify the device in the following
situations:

Synchronizing with a PC.

Connecting to a network.

Restoring information from a backup.
Note:
If you synchronize multiple devices with the same PC, each
device must have a unique name.
To make the battery last longer:
The device battery power lasts based on the battery type and
how you use your PPC-6700. Try the following to help preserve
battery life:

Tap Start > Settings > System tab > Power. On the
Advanced tab, you can specify when your device turns off
to conserve battery power. For optimum conservation,
specify 3 minutes or less.

Use the AC adapter to plug your device into external
power whenever possible, especially when using a miniSD
card or when using a modem or other peripherals.

Adjust the backlight settings.