UTStarcom PPC-6700 - Manuel (Page 91)

Section 6: Getting Connected Section 6: Getting Connected 85 Section 6: Getting Connected Section 6: Getting Connected
Use a Bluetooth Device as a Modem
You can use a phone that has Bluetooth capabilities as a modem
for your PPC-6700.
To do so, create a Bluetooth modem connection on your
PPC-6700 and then send information to another device by using
Bluetooth. The device relays the information over the network
and then sends back to your device any information that you
had requested over the connection. Once you create a modem
connection to the Bluetooth phone, you can reuse it whenever
you want to use the phone as a modem. Make sure that your
PPC-6700 and the destination device are turned on, Bluetooth is
turned on, and that the devices are within close range.
To accept a Bluetooth partnership:
1. On your PPC-6700, tap Start > Settings > Connections
tab > Connections.
2. Tap Add a new modem connection.
3. Enter a name for the connection. In the Select a modem list
box, select Bluetooth. Then, tap Next.
4. If the device appears in the My Connections list, skip to
step 9.
5. If the device does not appear in the My Connections list,
tap New Partnership, and follow the remaining steps.
6. Select the device name from the list, and then tap Next.
7. Enter a passkey, and then tap Next.
8. Enter the same passkey on the device, and then tap Finish.
9. Select the device in the My Connections list, and then
tap Next.
10. Enter the phone number to dial for this connection, and
then tap Next.
11. Enter the required logon information for this connection,
and then tap Finish.
You can start using this service for the program that uses the
Bluetooth connection, such as Inbox on your PPC-6700, to send
and receive e-mail, or Internet Explorer to browse the Web.