Quadra-Fire QFP44 - Manuel (Page 55)

Quadra-Fire • QFP44 • 4051-300 Rev M • 09/08 55
Figure 14.7 Adjust the Vertical BafÀ e
Figure 14.8 Positioning Rear Log
F. Install Logs, Ember Bed & Rockwool
• Remove the grate from the hearth by removing the
screws.
• Position rear log over the locating tabs at the rear of the
hearth pan. See Figure 14.8.
E. Adjust the Vertical BafÀ e
If the vertical run height is more than 12 feet, it may be
necessary to install the vertical bafÀ es that are included
with the unit to improve the À ame appearance. Install
each bafÀ e to cover the outside two slots in the lower
¿ rebox top. See Figure 14.7.
Figure 14.9 Positioning Ember Bed
• Position ember bed over the burner locating the corners
inside the brackets. See Figure 14.9.
• Position the grate in the recess of the ember bed
and attach to the hearth with the screws. See Figure
14.10.
Figure 14.10 Positioning Grate
• Position the cut out on the left front log over the grate
bar. See Figure 14.11.
Figure 14.11 Positioning Left Front Log