Onkyo UP-HT1 - Manuel (Page 8)

En-
8
If you cannot achieve good reception with the sup-
plied indoor FM antenna, try a commercially avail-
able outdoor FM antenna instead (see page 9).
The supplied indoor AM loop antenna is for indoor
use only.
2.
Use thumbtacks or something similar to
fix the FM antenna into position.
Caution: Be careful that you don’t injure yourself
when using thumbtacks.
Thumbtacks, etc.
Connecting the AM Loop Antenna
1.
Assemble the AM loop antenna, inserting
the tabs into the base, as shown.
2.
Connect both wires of the AM loop
antenna to the AM push terminals, as
shown.
Make sure that the wires are attached securely and
that the push terminals are gripping the bare wires,
not the insulation.