Onkyo UP-HT1 - Manuel (Page 23)

En-
23
If you have any trouble using the UP-HT1, look for a
solution in this section.
The UP-HT1 is not recognized by your Universal
Port-compatible Onkyo product
• Make sure the UP-HT1 is properly connected to
the UNIVERSAL PORT on your Universal Port-com-
patible Onkyo product.
• Turn off all devices before connecting to a UNIVER-
SAL PORT.
No sound
• Make sure your amplifier’s volume control is not
set to minimum.
• Check all connections and correct as necessary
(see page 6).
The UP-HT1 is connected to a Universal Port-com-
patible Onkyo product but doesn’t work
• Turn off all devices, and then set the UP-HT1’s
Mode selector to TUNER.
Can’t control the UP-HT1 by using the buttons on
the front panel of the Universal Port-compatible
Onkyo product
• This is normal. The UP-HT1 can be controlled only
by using the Universal Port-compatible Onkyo
product’s remote controller. (However, some prod-
ucts can control using the front panel’s buttons.)
• Press the [PORT] remote mode button on your
remote controller to select the PORT remote
mode.
The displays shown in this manual differ to what’s
displayed on your Universal Port-compatible
Onkyo product
• The exact information displayed depends on your
Universal Port-compatible Onkyo product. The
displays shown in this instruction manual serve as
examples only.
If you can’t resolve an issue yourself, try resetting the
UP-HT1 as follows before contacting your Onkyo
dealer.
Connect the UP-HT1 to your Universal Port-compati-
ble Onkyo product. On your Universal Port-compati-
ble Onkyo product, select the PORT input source.
Troubleshooting