Onkyo UP-HT1 - Manuel (Page 7)

En-
7
Setting the Mode Selector
Turn off the Universal Port-compatible Onkyo prod-
uct before setting the Mode selector.
• TUNER: Select this to listen to HD Radio.
• THROUGH: Select this to listen to the device con-
nected to the UP-HT1’s Universal Port, for exam-
ple, an iPod in a UP-A1 dock.
• AUTO: When AUTO is selected, the source is
selected automatically when the input source is
changed on the Universal Port-compatible Onkyo
product. For example, selecting the TUNER input
source selects the UP-HT1, while selecting the
DOCK input source selects the dock (UP-A1, etc.)
connected to the UP-HT1’s Universal Port. Note
that some Universal Port-compatible Onkyo prod-
ucts do not support this functionality, in which
case you will need to set the Mode Selector manu-
ally.
The supplied indoor FM antenna is for indoor use
only.
Connecting the Indoor FM Antenna
1.
Attach the FM antenna, as shown.
Once your UP-HT1 is ready for use, you’ll need to
tune into an FM radio station and adjust the posi-
tion of the FM antenna to achieve the best possible
reception.
Insert the plug fully
into the jack.