Sylvania ST88244 - Manuel (Page 7)

7
Storing a Number in Memory
Your ST88244 phone has 10 memory
locations for storing important telephone
numbers.
1. Remove the
handset from the
base and press
MEM. The
TALK/BATT LOW
LED flashes.
NOTE: You have 30 seconds after pressing
MEM to enter the number you wish to
store. Otherwise, an error tone will sound.
2. Enter the phone number you want to
store (up to 20 digits).
3. Press MEM and enter a number (0-9) on
the keypad for the memory location or
SPEED DIAL you want to use.
You hear a long beep and the
TALK/BATT LOW LED goes out
indicating the number has been
stored successfully.
If you enter a number in a location
that has a previously stored number,
it will overwrite the existing number
without warning.
Entering a Pause in
Memory Dialing
The pause feature is useful for long
distance calling, credit card dialing,
or sequences that require a pause
between digits.
To use this function, press PAUSE/REDIAL
on the handset in the phone number
sequence at steps
1 and 2 in “Storing
a Number in
Memory”.
NOTE: Remember, the phone number you wish to
store cannot have more than 20 digits,
including the pause. (The
PAUSE button
counts as one digit.)
Follow step 3 in the “Storing a Number in
Memory” section to complete the operation.
Storing Mixed Tone/
Pulse Numbers
If your phone is set up for pulse dialing,
you can store a mixed mode number
(up to 20 digits) to easily access long
distance services.
1. Remove the handset from the base
and press MEM. The TALK/BATT LOW
LED flashes.
2. Enter the number to be dialed in
pulse mode.
3. Press the
* /TONE button
on the handset.
The
* /TONE
button counts as
one digit and
enters a pause.
4. Enter the number(s) to be dialed in
tone mode.
5. Press MEM and a number (0-9) on the
keypad for the memory location you wish
to use. You hear a long beep and the
TALK/BATT LOW LED goes out.
Dialing a Stored Number
To dial a phone number stored in memory,
press TALK, then press MEM and the
memory location (0-9). Your phone will dial
the stored number.
NOTE: If you select a memory location that
does not have a stored number, the
handset will beep rapidly and the
phone will not dial.
UP043DH (ST88244) resize 3/3/04 5:24 PM Page 7