Panasonic WV-LC1710 - Manuel (Page 9)

9
- +
EIA Rack
Mounting
Screws
(M4×12)
Rack Mounting Screws
(procured locally)
Cautions:
• The installation described below should be made by qualified service personnel or system installers.
• During installation, remove all connected cables and turn off the power of the monitor.
Removing Stand in the Monitor
Before installing this monitor on the wall or in the rack, the monitor stand shall be removed.
Mounting into the Rack
To install this monitor in rack, use the Rack Mount Bracket WQ-LM171 (optional) and rack mounting screws (procured locally).
Mounting
Screws
(M4×12)
INSTALLATION
1 Remove two M4 screws to remove the stand cover.
2 Remove the stand assembly by removing four M4
screws from the stand.
3 Remove the stand arm by removing the three remaining
M4 screws.
1 Remove four screws on both side panels.
2 Mount the rack mount brackets to the sides of the moni-
tor.
Fix the rack mount brackets by using four supplied
screws (M4×12).
3 Mount the upper rack mount bracket on the upper side
of the monitor.
Fix the upper rack mount bracket by using two supplied
screws (M3×8).
4 Install securely the monitor in the rack using eight
screws (procured locally).
Upper Rack
Mount Bracket
Mounting Screws
(M3×8)
Mounting Screws
(M4)
Mounting Screws
(M4)
Mounting Screws
(M4)
Stand Arm
Stand Cover
Mounting Screws
(M3×8)
Stand